Вот что мне сказали про 10 Гц!!!! нехорошие...

The MTK chipset which is built-in your LS23030 can be supported to 10Hz.

But, the MTK doesn’t allow the customer to change the firmware, so LOCOSYS
can’t be responsible for the result if the F/W is adjusted by customers
themselves.

If they need 10Hz firmware, it needs to be set before shipping out from our
factory.



You can find some documentation on the internet, but that was not the
official report of MTK.



If you need 10Hz update rate of LS23030, you can ask EFO Ltd. to buy a new
one from LOCOSYS.