Андроид

[Dim252]

Terminal log file
Date: 01.12.2014 - 21:35:53
-----------------------------------------------
        HELLO! BOOT0 is starting!
boot0 version : 3.0.0
dram size =1024
sum=0x2914ee60
src_sum=0x2914ee60
Ready to disable icache.
Jump to secend Boot.
[      0.133]

U-Boot 2011.09-rc1-00003-ge89ab14-dirty (Jan 03 2014 - 12:57:33) Allwinner Technology 

[      0.143]version: 1.1.0
[      0.146]pmbus:   ready
[      0.250]PMU: AXP209
[      0.253]PMU: AXP20x found
[      0.256]PMU: bat ratio = 100
[      0.259]after set, dcdc2 =1400mv
[      0.263]PMU: dcdc2 1400
[      0.265]PMU: pll1 912 Mhz
boot_clock = 912
dcdc2_vol = 1400
[      0.273]after set, dcdc2 =1400mv
dcdc3_vol = 1250
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 0
storage_type = -1
usb_recovery = 1
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[      0.309]DRAM:  1 GiB
relocation Offset is: 35b23000
donn't initialize ther user_gpio (main_key:boot_init_gpio)
DRV_DISP_Init: opened
[      0.523]boot_disp.output_type=3
[      0.527]boot_disp.output_mode=10
[      0.530]boot_disp.auto_hpd=1
workmode = 0
[      1.834]NAND: NAND_UbootInit
NB1 : enter NAND_LogicInit
nand : get id_number_ctl from script, 3
not burn nand partition table!
NB1 : nftl num: 3 
 init nftl: 0 
NB1 : NAND_LogicInit ok, result = 0x0 
[      2.166]sunxi flash init ok
set to recovery
try sprite_led_gpio config
sprite_led_gpio start
sunxi sprite begin
screen_width = 1280
screen_height = 480
bar x1: 320 y1: 200
bar x2: 960 y2: 280
part name  = bootloader
part start = 32768
part size  = 65536
part name  = env
part start = 98304
part size  = 32768
part name  = boot
part start = 131072
part size  = 32768
part name  = system
part start = 163840
part size  = 1048576
part name  = recovery
part start = 1212416
part size  = 65536
part name  = databk
part start = 1277952
part size  = 524288
part name  = misc
part start = 1802240
part size  = 32768
part name  = private
part start = 1835008
part size  = 32768
part name  = data
part start = 1867776
part size  = 2097152
part name  = cache
part start = 3964928
part size  = 655360
part name  = UDISK
part start = 4620288
part size  = 0
data part size=2097152
begin erase part data
finish erase part data
part name  = bootloader
part start = 32768
part size  = 65536
part name  = env
part start = 98304
part size  = 32768
part name  = boot
part start = 131072
part size  = 32768
part name  = system
part start = 163840
part size  = 1048576
part name  = recovery
part start = 1212416
part size  = 65536
part name  = databk
part start = 1277952
part size  = 524288
part name  = misc
part start = 1802240
part size  = 32768
part name  = private
part start = 1835008
part size  = 32768
part name  = data
part start = 1867776
part size  = 2097152
part name  = cache
part start = 3964928
part size  = 655360
part name  = UDISK
part start = 4620288
part size  = 0
sprite update error: read image start error
sprite update error: current card sprite failed
now hold the machine
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:11-
-name-        -start-       -size-      
bootloader  : 1000000       2000000     
env         : 3000000       1000000     
boot        : 4000000       1000000     
system      : 5000000       20000000    
recovery    : 25000000      2000000     
databk      : 27000000      10000000    
misc        : 37000000      1000000     
private     : 38000000      1000000     
data        : 39000000      40000000    
cache       : 79000000      14000000    
UDISK       : 8d000000      0           
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 6, low 4
cant find fstbt value
to be run cmd=run setargs_nand boot_normal
the user data'magic is bad
WORK_MODE_BOOT
WORK_MODE_BOOT
[      2.431]Hit any key to stop autoboot:  2  1  0 
read boot or recovery all
[      5.235]sunxi flash read :offset 4000000, 12287672 bytes OK
[      5.243]ready to boot
NAND_UbootExit
NB1 : NAND_LogicExit
[      5.246]
Starting kernel ...

aw_pm_init: not support super standby. 
aw_pm_init: script_parser_fetch err. 
notice: ir_wakeup = 0.
can't get item for emac_power gpio !
rtc_hw_init(416) err: set clksrc to external losc failed! rtc time will be wrong
sunxi_rtc_gettime(34): err, losc_err_flag is 1
##fb init:w=1280,h=480,fbmode=0
[hdmi]hdmi module init
sunxi_rtc_gettime(34): err, losc_err_flag is 1
sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
init: reading config file
init: -----------没找到sata节点,nand启动--------------
init: logo match failed!fbsize = 2457600
init: [william] tvstatus = 0!
init: HDMI status = 0, try 40 times!TV status = 0
init: start e2fsck listening...
[hdmi]hdmi module init
init: do_umount: /data 
init: do_umount: /cache 
init: dont need format /dev/block/UDISK
init: dont need format /dev/block/private
init: do_umount: /databk 
ir_init: ir_wakeup script_get_item error. 
ir_init: power_key script_get_item error. 
ir_init: ir_addr_code script_get_item error. 
failed to get gpio_para used information
[sunxi_leds_init] request gpio188 failed
init: untracked pid 1117 exited
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
android_usb: already disabled
init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
init: C_IN_START
init: path = /dev/block/data
init: C_IN_START
init: path = /dev/block/cache
sunxi_rtc_gettime(34): err, losc_err_flag is 1
init: sys_prop: permission denied uid:1003  name:service.bootanim.exit

-----------------------------------------------
Date: 01.12.2014 - 21:36:55
End log file

Сливай прошивку с устройства и выкладывай на яндекс диск... Распакую гляну..